SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

Load image into Gallery viewer, SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

Sensky

SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

Regular price: €46,00
Sale price: €46,00
Regular price: ~~€76,00~~
Unit price: per

Save 39% (€30,00)

Quantity must be 1 or more

Tracked Shipping on All Orders
14 Days Returns

Description

?Motion Activated? : Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting.
?Light Sensor Adjustable?: This function allows you to use the motion sensor in different ambient condition, for example, you set the light sensor value to 20 lux, when the room ambient light value is above 20 lux, the light wont turn on, but when room ambient light value is less than 20 lux, the sensor can turn light on when motion detected within sensing range.
?Delay Time Adjustable- Please set this to its minimum value first then try to figure out your values for the Sensitivity and Light Sensor- this will save your time?: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time.
?Sensitivity Adjustable?: The sensitivity controls how close you need to be to the sensor in order to activate it.
?Wide Application?: You can use this sensor in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting.

Shipping and Returns

We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

Customer Reviews

I SO wanted this to work.This device failed on the first use. The motion sensor turns on but never turns off. I followed all instructions, but there was not info about max amps. The cause of failure was likely that the little relay inside this device can't handle much power; maybe not more than 10ma. I had connected an LED trailer light to it, which pulls 100ma or more, which fused the motion sensor's internal relay so now the motion sensor can no longer turn the light off. You should connect this motion sensor to an external 12VDC relay, then use the relay to turn your light or other load on/off. That will isolate and minimize the load on the motion sensor. I'm out $10. Hopefully this will work for you.1Works great, no issues with picking up motion, easily tweaked for your usageReally good product. It detects motion over 15 ft away at an angle. I use this to underlight the cabinets in my kitchen and there is no way I can sneak up to the kitchen without it turning on. As NASA would say mission accomplished. I'm thinking about getting more of this and using it under the eve of the roof to light up sections of LED strips when motion is detected. Imagine the burglar trying to get to the window, and every time he moves within 5 ft, the whole area is lit up. I forgot to mention that there's several tweaks you can do on how long the circuit stays on or how sensitive it is. That's another bonus. It's also compatible with the standard LED strip plugs and I did not have to get an adapter or have any issues having it fit.5Can be a little finicky to get set-up but it works just fine. Used this handy little item for the LED lights I installed in my father's gun safe. Took a little adjustment to get the shut off delay working the way I wanted it too, but it's been great and he was very pleased.My only complaint with this sensor is that you have to pop the back plate off to adjust the settings and I was a little nervous about breaking the plastic tabs that hold the thing together. But other than that worked beautifully, will be purchasing more. 5Works well for LED strip light in office cabinetI am using the BS010l as a motion switch to trigger an LED strip in a metal storage cabinet upon opening.SETUP: It plugged easily into the existing male/female jacks of the system I was using and I found setting the timers and sensitivity to be very easy by following the instructions clearly laid out on the package the sensor came in. Total setup took less than 2 minutes. It seems very user friendly, pretty plug and play.INITIAL IMPRESSIONS: I am very satisfied so far, it triggers the light strip as soon as the cabinet opens and the sensor has line of sight to a body generated IR source (I usually see the lights flick on as they're triggered by my hand as I reach to swing the cabinet open). The light stays on for 8.5 minutes without being triggered again (I timed it several times out of curiosity) and I find its sensitive enough to remain triggered when I leave the cabinet open and am moving about the room anywhere within line of sight of the sensor. DOES IT WORK: it works well! It's very handy and I think it's worth it's cost as long as it continues functioning as it is now. It will be triggered several times a day, every day. If I encounter any problems I will update this review. As of now, I recommend this sensor and I may even pick up another one to rig a similar LED system in a walk in closet.PROS: easy to install, easy to setup, understandable directions included, acceptable build quality, small size, decent looking, works well.CONS: none as of now. Will update if necessary.5Using this to controlI bought some strip lites for my gun safe and bought a button switch for the door that I could not get to work. Seen this on YouTube so I ordered it up. Plugged it in and boom, there is was. To make the delay on the switch to last longer, keeping the light on longer, unsnap the back and the there blue adjusters in there. Turn i counter clockwise to turn up the time it stays on. I've add a picture and marked the one you need to adjust if you want the light to stay on longer.5Power in, power outAfter fiddling with this sensor, it works great. Be sure to read the instructions and make your adjustments as needed and you will be satisfied with this. Make sure your input power power source and the output to you lights are correct. If you do this backwards, the lights will stay on and will not shut off. It is possibe to do this, that is what I did first before realizing it was wrong.5Works Great!Works great! Installed on LED light strip inside a gunsafe. The lights turn on the second the door cracks open. No complaints yet!Paired with:inShareplus 12V LED Strip Power Supply 2A 24W, Wall Mounted 12V Switching Power Supply, 110V to 12 Power Supply for LED Strip Light with 5.5/2.1 DC Female Barrel Connector to Screw AdapterLE 16.4ft LED Flexible Light Strip, 300 Units SMD 2835 LEDs, 12V DC Non-waterproof, Light Strips, LED ribbon, DIY Christmas Holiday Home Kitchen Car Bar Indoor Party Decoration (Daylight White)5Been good for me I've only had the sensor installed for a couple days now, but so far I am very happy with it. Once I got it adjusted to the setting I wanted it's been great. I'm using it inside of a safe with LED strips so it turns on when the door is open, then shuts off in a minute or so.Couple of pieces of advice would be to not adjust the sensitivity to minimum value, the switch won't detect any movement, and also do not adjust the delay time to minimum value or light will keep turning on and off all the time when the switch senses motion. 5simple PIR sensor did the trick for halloweenI used this for a halloween build, in order to set off a 12v vibration motor behind a door. The settings on the dials were a little tough for me to dial into exactly what I needed it for, but my need was weird. At the shortest timer, it pulsed my 12v motor nicely to give a jump scare in my Halloween haunted house. Getting the sensitivity to where I needed it was a bit of trial and error, and it still wasn't quite what I expected. It seems to detect distance much easier than a wide field of view (setting the sensitivity too high had it responding to motion across the room directly in front of it, but still missing motion right next to it at too extreme an angle).Still, it worked nicely after some effort, and for my purposes was exactly what I needed. I'll be using a few more of these next year.4A perfect combination for lighting my gun safe.These three products work perfectly together so that when I open my gun safe, the lights come on:Sensky BS010l Dc12v to 24v Mini Pir Motion Sensor Switch,occupancy Sensor SwitchLE Power Adapter, Transformers, Power Supply For LED Strip, Output 12V DC, 3A Max, 36 Watt Max, UL ListedLE 16.4ft LED Flexible Light Strip, 300 Units SMD 2835 LEDs, 12V DC Non-waterproof, Light Strips, LED ribbon, DIY Christmas Holiday Home Kitchen Car Bar Indoor Party Decoration (Daylight White)5Think about where you will place them so lights aren't coming on all the time.These are great! The motion detector works flawlessly, and, if mounted in the right spot, they don't get false signals. We have a problem with a cat that has depth perception issues at night. She could not find her food at night, and would just whine until someone got up and turn on the light. I installed these inline with an LED light strip under the kitchen counters. Now the cat just walks in the kitchen and the lights come on so she can find her bowls. Also, when I walk in the kitchen in the dark, I can see because the sensor "sees" my feet and turns on the lights. I bought a couple more for my garage entry, and under the bed rails.5Works for my appicationI think it works well.I probably bought this for the wrong purpose. I'm using it to trigger a camera for home security.I used a voltage divider and I'm able to read the ~12.23v dropped down somewhere around 3-4V with an ADC in my case MCP3008 with 5V reference. I'm able to trigger the camera with a 300ms delay using Raspberry Pi's built in raspistill command and python os.system to call that command otherwise ran by exec() on command line.Anyway it works for me. The range was not as far as I would have liked, I'd say 20 feet was hoping like 30 but oh well. It was tricky to turn the potentiometers at the back for adjusting sensitivity. The light pot for example I don't even know how to use it in real time. I set the delay to lowest possible and then had it connected to a multimeter to see in real time where (how far) it would trigger, where it would shoot from 0.01V to over 12V.update:now that I'm actually using this thing, I'm not sure how reliable it is, it seems to randomly fire despite the low (0) analog readings and the room is empty (no motion/changes) so I'm not sure, will see if it's the light possibly but even that is constant (inside a house) at night currently. Will see about implementing a sort of debouncer (many fires means definite) versus only 1 is a fluke.I tuned it to work at a distance of just under 12 feet away. Sampling at a rate of 200ms, The peaks are above my 500 threshold according to my notes above. You can see some real time screen grabs as I was testing it.I'll update my code to treat it like a debouncer to only trigger when "true motion" is detected.Left is at rest, right is when I'm walking throughEdit: My final updateThis is not reliable to me, I even tried the "debouncer" or sampling the live data (300ms) if in 4 sequential measurements two were what I was looking for, fire the camera. Even in a dead still room, and nothing is moving (live alone) and no fluctuations that I'm aware of. The sensor randomly spikes sometimes it's once in say 20 measurements, then it'll be 3 almost in a row (which trips my debouncer)It was cool to work with but not reliable for motion sensing to trigger a camera (not take pictures when nothing is happening).Still give it a decent score maybe it's me. Doesn't help the calibrating of this thing is not easy/immediate.I did want to add I'm using a wireless raspberry pi 3 and looking around it seems that it's possible for the wifi to trigger it. So I'm going to try and move the PIR sensor away from the PI. It's also near a router maybe that is part of the problem.Wow, moved it away from the router by at least 10 feet and holy cow, no false positives at all. It's not the Pi's wireless, that hasn't changed (distance between pi and PIR sensor) just that this setup was near a router interesting. Cool!Actually I was able to move it even closer as the place I had it before was an ideal position regarding camera fov and sensor distance from the door.5

Categories

Appliances

Cookware

Bed & Bath

Main menu

SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

Description

Shipping and Returns

Customer Reviews

SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

Categories

Appliances

Cookware

Bed & Bath

Main menu

SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

Description

Shipping and Returns

Customer Reviews

SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

Please adjust the following:

Please adjust the following: